AdBlue®
What is AdBlue®?
AdBlue® is an additive used in diesel engines equipped with a selective catalytic reduction (SCR) system to reduce emissions of nitrogen oxides (NOx), which are harmful atmospheric pollutants. AdBlue® consists mainly of demineralized water and urea, which react chemically with the exhaust gases, transforming them into water vapor and nitrogen that are harmless to the environment.
AdBlue® is mandatory for diesel vehicles complying with the Euro 6 emissions standard, which came into force in September 2014. Many automakers use this technology.
Why carry out AdBlue® quality control?
AdBlue® quality control is an important measure to ensure the proper operation of the Selective Catalytic Reduction (SCR) system, which reduces nitrogen oxide (NOx) emissions from diesel vehicles. If AdBlue® is of poor quality, it can cause engine problems such as crystals, blockages or poor combustion. It can also lead to loss of performance or increased fuel consumption.
AdBlue® quality control according to ISO 22241-2 is a set of test methods designed to verify the conformity of the urea solution used in diesel vehicles equipped with a selective catalytic reduction (SCR) system to reduce nitrogen oxide (NOx) emissions. ISO 22241-2 includes appendices defining the parameters to be tested, the measurement methods and the authorized limits.
TERA Environnement has been assisting you with AdBlue® quality control for over 10 years.
What are the parameters to be analyzed?
The parameters to be analyzed are those described in ISO 22241 (-1 -2):
| Parameters | Standard |
|---|---|
| Urea concentration | ISO 22241 Annex C |
| Density at 20ºC | ISO 22241 ; EN ISO 12185 |
| Refractive index at 20ºC | ISO 22241 Annex C |
| Alkalinity in NH₃ | ISO 22241 Annex D |
| Biuret | ISO 22241 Annex E |
| Aldehydes | ISO 22241 Annex F |
| Insoluble | ISO 22241 Annex G |
| Phosphate (PO₄) | ISO 22241 Annex I |
| Metals (Ca, Fe, Cu, Zn, Cr, Ni, Al, Mg, Na, K) | ISO 22241 Annex I |
| Purity | ISO 22241 Annex J |
Why choose TERA Environnement for quality control?
Discover the 4 reasons to choose our laboratory for your AdBlue® quality controls
1 – Experience and professionalism
Our laboratory has been carrying out quality controls on AdBlue® to ISO 22241 for over 10 years.
2- Responsiveness
Test results are delivered within 24 to 48 hours on receipt of samples before 11:00 am at the Fuveau laboratory.
3- Attractive prices based on sample volume
4- Possible analysis of raw materials used to manufacture AdBlue®.
Our laboratory can also carry out analyses on the following samples:
- Solid urea
- Liquid solutions with urea concentration above 32.5%.
- Rinsing water from production tanks
- Process water used to manufacture AdBlue®.
